Sign in to follow this  
Followers 0
PLANT

OBD2 Recommended for 2003 S40T in 2017?

5 posts in this topic

Hi all,

Looking at buying an OBD2 bluetooth(Android phone)

Any cheap recommendations?

Have seen Youtube video working with this model but also have seen pull down menus that says it is not compatible?

 

Looking at this on Ebay:

We will carefully check every item before shipment. The quality is guaranteed!

Note: Russian buyers were required to fill in the full name ( normally including  the name, father's name and surname,three individual words) in the shipping address to pick up the item as the Russian postal policy adjustments.

 

index.php?f=aW1nL1gxMjktQS5qcGc%3D&u=c2hhbnNodWkyMDEx

Smaller size mini car Bluetooth diagnostic scanner works on  Android Torque/PC, which can help you diagnose the trouble of your car!

Features: 
This mini car bluetooth diagnostic scanner works on Android Torque/PC with the latest software version V2.1 and hardware Version V1.5. 
Bluetooth Password: 1234  
Read diagnostic trouble codes, both generic and manufacturer-specific, and display their meaning (over 3000 generic code definitions in the database). 
Clear trouble codes and turn off the MIL ("Check Engine" light). 
Display current sensor data, including: 
* Engine RPM 
* Calculated Load Value 
* Coolant Temperature 
* Vehicle Speed 
* Timing Advance 
* Fuel System Status 
* Fuel Pressure 
* Short Term Fuel Trim 
* Long Term Fuel Trim 
* Intake Manifold Pressure 
* Intake Air Temperature 
* Air Flow Rate 
* Absolute Throttle Position 
* Oxygen sensor voltages/associated short term fuel trims 

Specifications: 
Support OBD-II protocols as follows: 
1.ISO9141-2(5 baud init,10.4Kbaud) 
2.ISO14230-4 KWP(5 baud init,10.4Kbaud) 
3.ISO14230-4 KWP(fast init,10.4Kbaud) 
4.ISO15765-4CAN(11bit ID,500 Kbaud) 
5.ISO15765-4CAN(29bit ID,500 Kbaud) 
6.ISO15765-4CAN(11bit ID,250 Kbaud) 
7.ISO15765-4CAN(29bit ID,250 Kbaud) 
Compatibility: 
* Works on all OBD2  petrol cars ( from 1996 in USA). 
* Compatible with Android Torque and Windows Smartphone, Windows PC. 
Product Size: 7 * 4.5 * 2.5cm / 2.8 * 1.8 * 1in 
Product Weight: Approx.47g / 1.7oz 
Package Size: 13.5 * 10 * 3cm / 5.3 * 3.9 * 1.2in   
Package Weight: Approx.47g / 1.7oz 

Note: It is not compatible with Nissan vehicles. 

Package List: 
1 *   Bluetooth Diagnostic Scanner  
1 * CD

 

Share this post


Link to post
Share on other sites

So I got an Ebay ELM327......came with 2.1 Firmware plugging in the power lights face the pedals....
So I got it going and default Dials are Speed and Acceleration worked.
My Boost psi and Throttle did not work(have a turbo)????

Got home and looked at this you tube video: https://www.youtube.com/watch?v=GMYZNal9Wpk

Found the other dials and have it setup for 6 on the phone.
Have added MAF and Coolant.

What DIALS do you have setup on yours?

Now I checked the logged\pending codes and it produced an Ignition Coil code....I just had them replaced....the mechanic did not reset codes?
Show historic faults.....had none?

Share this post


Link to post
Share on other sites

So the PO352 Pending\Fault code won't clear? This fault(Ignition Coil B Primary/Secondary Circuit Malfunction) is "not" showing on the dashboard and I understood fixed by replacement of parts? Why won't the fault clear on Torque Lite?

Dials update MAF and Fuel level don't work, Coolant and RPM does work.

Share this post


Link to post
Share on other sites

I use the DashCommand app with iOS so I can't comment on the dials and such for Torque.

It could clear by itself after some use. I usually use Vida/Dice to clear the troublesome codes. Even if I clear misfire codes with DashCommand it takes some number of drive cycles to clear.

 

Share this post


Link to post
Share on other sites

So I got an Ebay ELM327......came with 2.1 Firmware plugging in the power lights face the pedals....
So I got it going and default Dials are Speed and Acceleration worked.
My Boost psi and Throttle did not work(have a turbo)????

Got home and looked at this you tube video: https://www.youtube.com/watch?v=GMYZNal9Wpk

Found the other dials and have it setup for 6 on the phone.
Have added MAF and Coolant.

What do DIALS do you have setup on yours?

Now I checked the logged\pending codes and it produced an Ignition Coil code....I just had them replaced....the mechanic did not reset codes?
Show historic faults.....had none?

Edit: So the Pending\Fault code won't clear? This fault is "not" showing on the dashboard and I understood fixed by replacement of parts? Why won't the fault clear on Torque Lite?

Dials update MAF and Fuel level don't work, Coolant and RPM does work.

Edit2: Will try this to clear codes....http://www.e90post.com/forums/showthread.php?t=1249867

With Torque, try having the car such that the ignition is on, but the engine is not running, then touch the clear code button, then turn the ignition off. This should work to clear the codes.

Edit3: The above clears the codes CONFIRMED!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now
Sign in to follow this  
Followers 0